1987 SPG project

[Malko]

I tried to open it for about 3 hours before I cut it. There is 0 clearance between my intercooler and the front of the core and about 3/8" between my condenser and intercooler from the bottom. There was no clearance to get to the latch. Should of just deleted the a/c!!!....

[spg1]

I would say a bit harsh as well and not thought out. You could have taken off the front bumper, lowered the intercooler and had access to the catch.

[Malko]

Originally Posted by spg1

I would say a bit harsh as well and not thought out. You could have taken off the front bumper, lowered the intercooler and had access to the catch.

its hard to remove the intercooler when its bolted from the top... And I did remove the bumper.

[spg1]

Originally Posted by Malko

its hard to remove the intercooler when its bolted from the top... And I did remove the bumper.

What a bummer that you had to go through that. I guess they mad it so you just can't get into these things easily

[Malko]

so my car is running great, no leaks anymore so that makes me happy, i am at 980 miles! break in period is over... i plug in my apc to get some boost, and the apc is making a constant clicky noise when plugged in so i swapped out for another apc, and the same result. does anyone know what this is or how to fix it?

[Krizzie]

Bad wiring probably, check if everything is grounded properly.

[Malko]

does anyone know where those two wires to the apc go/come from. I know apc isn't grounded itself since its plastic...