Well to put it simply I was jacking up the left side and had a jackstand at the ready when the jack flew out and the car landed on the jackstand via the door
Now there is a huge pressed in section right on the bottom corner of the door about a 1/2 in deep and 6 in long. And the side bowed out as well. And of course there is no way to get to the other side of the panel to bang it out. The only lucky part of this is it didn't hit the frame at all. But I really doubt that I'll be able to find a Malackite door anywhere.
My only hope is spg panels. Do they curve around the bottom of the door and how snug are they (with the side bowed out)?