|
|
|
|||||||
| Register | Garage | Photo Gallery | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Auto Escrow | Auto Loans | Insurance |
| Saab 9-3 & NG900 Performance, Mods & Tuning Covers Tuning & Performance modifications for the Saab 9-3 98'-02' & NG900 |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Well call me a ricer but I want my saab lowered around 2.25-2.5 inches..I havent seen any available..am I missing a kit? Has anyone tried taking an Eibach Spring and cutting it a little bit? Always appreciate the help guys
|
|
#2
|
||||
|
||||
|
I strongly suggest you do not cut the springs, all that coil wind is there for a reason.
Firstly with that amount of drop you'll need to source short stroke dampers if you can get them the springs will certainly be available. |
|
#3
|
||||
|
||||
|
And don't plan on driving it in the winter!
|
|
#4
|
|||
|
|||
|
I am assuming with all of these "slammed" civics, etc there must be shocks made for more lowered vehicles (adj konis?) ..the question is, i need to find a spring that drops the car...
|
|
#5
|
||||
|
||||
|
I know it won't give you the precision of springs set to that height, but have you considered the little clamp on spring compressors? I had a friend who had them and they significantly dropped his car. I have to admit, the ride wasn't that bad either. He had done it as a temporary measure until he got the money for an Eibach kit.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|