SaabCentral Forums banner

Dual Stage Boost Controler

2K views 2 replies 2 participants last post by  ERP 
#1 ·
See less See more
1
#3 ·
You probably will not find one at a local hardware store. The important specs for the solenoid are that it must be 12 volts DC and be able to handle at least 30 psi. The link I have on that page to the solenoid valve is a good choice. That valve will work well, I use one for my water injection system. It will require two hose barb fittings.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top