SaabCentral Forums banner

Rotor arm

1K views 6 replies 5 participants last post by  Deanosabby 
#1 ·
This may be a stupid question but is there anyone out there who can tell me how to remove the rotor arm on my 1993 TurboS
I have tried a few times by giving it a good pull but it won't shift. Any idea's.
Cheers,
Deano
 
#2 ·
If it won't pull off with some force, it may well have been glued on for some reason. Whay are you wanting to remove it?

It can be cleaned in situ with a gentle glass paper rub over the metal contact. If you are wanting to remove it to install a replacement, then a more heavy handed approach might well be necessary. You can crack it off using pliers.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top