SaabCentral Forums banner

Anyone delt with these guys?

1K views 7 replies 5 participants last post by  Saab-Daniel 
#1 ·
Hi guys.
As my turbo is on its way out (smoke, a bit of whine), I was surfing and looking at turbo's.
I've seen www.turbocalculator.com before, but was wondering if anyone have delt with them before?
Daniel.
 
#3 ·
Well, seems like I will be getting one from them too, snail ;)
Since you might sort it out for me, I wont need them as much... Just thought a trim60 was REALLY cheap!?
Daniel
 
#6 ·
Have i got the conversion rates right, a MIT TE05-12B6 for 5,700 Kr = £409??????

Is it in Swedish Krona (is there any difference?????)


Time to start saving up i think!

Steg 1
TB03

T3
Trim60
Skruvat SP3Standard300hk
Max 1,5bar
59.2012
6,650 kr
A


Is that the one your looking at Daniel?
 
#7 ·
Si said:
Have i got the conversion rates right, a MIT TE05-12B6 for 5,700 Kr = £409?????? Time to start saving up i think!
I just got an exchange one for the Ruby which is the same model I *think* (not sure about the B6 bit) from CR Engineering, New Milton, Hampshire. 12 mths w'tee £285+vat but if I could have sent it in would have been rebuilt from £150+vat. Running it in at max 3000rpm for a bit but seems good so far :)
 
#8 ·
Si, yes, there is a difference! 100 swedish kroner equals roughly 80 danish kroner, so a big difference!
But no, Si, SG has a contact in sweden who sells trim 60 for appx 3500 swedish kroner, then comes shipping... SG has nothing to do with the guy himself, but have ordered his trim60 from him, so mod's, not an ad ;)
Daniel.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top