I think we have talked before about how useful it would be to have an oil pressure and/or oil temp gauge, this sandwich plate thingy, would enable this plus allow for an additional oil cooler if required.
Looks like Scoobies use them.............anyone had a go with one of these?
Does anyone here know the size of that o-ring on the oil filter housing (the big bolt to the right of where the two blue fittings joining the oil cooler hoses go? mine's seeping from there
Chris interesting comment about the pillar mount. I want to add an oil pressure guage and a volt guage but can't seem to figure out a place to do the mounting. Maybe some of our forum members who have addressed this problem could post some pictures? I'm trying to find a solution that does not require hacking up the dash board or panel. The "a" pillar mount seems like an easy solution but is not my first preference. There may be some digital solutions that would offer smaller guage faces and require less fitting modifications to the dash. Thanks, Dan
Does anyone here know the size of that o-ring on the oil filter housing (the big bolt to the right of where the two blue fittings joining the oil cooler hoses go? mine's seeping from there
Sadly I don't know, but I know that's the oil thermostat housing. Perhaps the dealer will have a replacement.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
SaabCentral Forums
3M posts
119.2K members
Since 2001
SaabCentral forum the most comprehensive Saab resource on the internet. Join our discussions on the Saab 9-3, Saab 9-5, Saab 900, Saab 9000 and all other Saab models, choose your forum.