Hi all I put the auto box into my 93 9000 with TCS and I am have some concern on the routing off the kick down cable on the trans. The cable travels in an almost loop to the KDW and there is some confusion on the brackets on the bell housing and frame. Does anyone know where I can find or have a picture of the cable in its correct position? steve
I have posted some pictures to try and explain what I mean. I have the tail end correct, but as the cable leaves the trans, I am not sure if it is routed correct the way I have it. There is a third removable bracket on the bell housing that looks like it should be used. All the information I can find is only for the 93 without the KDW. Thanks steve
Wow Chengy I am impressed, where did you find that? It even comes with instructions on how to set the cable. I am very grateful. You must have access to factory manuals. That settles that big issue about cable adjustment. I think I might have figured out the problem I was having with the cable on the other end as it leaves the trans case. Near as I can figure, the one cable clip I was concerned about fits the vehicles without the KDW and was on the Bell housing (perhaps this trans is not the original). Anyways, I say that because the bracket is on the other car I have without KDW and I cannot see how it could work on a KDW system. If I do this again, I am taking pictures. Steve
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
SaabCentral Forums
3M posts
119.1K members
Since 2001
SaabCentral forum the most comprehensive Saab resource on the internet. Join our discussions on the Saab 9-3, Saab 9-5, Saab 900, Saab 9000 and all other Saab models, choose your forum.