SaabCentral Forums banner

Clutch Questions

763 views 3 replies 3 participants last post by  Matthew 
#1 ·
Are these clutches a PITA or is it me? I replaced the disc and pressure plate but can't bleed this thing to save my life. I tried the inner tube as well as a mightyvac on the bleeder nipple-both with no results. I've got to be missing something very simple-any ideas?? You won't offend me with no brainer 'have you's' since it has to be one of these.

Thanks.....
 
#3 ·
loose pressure plate bolts

In the last thread of the info sent by jezzadee (thanks), the last line states that if that doesn't work go back and tighten the loose pressure plate bolts.
Are they supposed to be loose when I'm bleeding the system? Mine are tightened up.
Please tell me this my bonehead reason I can't bleed the clutch....
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top