Here is the dyno from today with b234r motor running less boost than the 2.0 motor and no methonal injection. Peaked 25psi held 22psi. 2.0 motor spiked to 29psi, held 25psi...
Its making pretty good power without it and it adds more torque than hp in the saab motors. I think I gained 15whp and 39wtrq on the 2.0 motor and I really don't need more torque now, but the other reason is you want to be at least 12.5/1 on a/f before you run it because it richens the mixture a full point and running 10.5/1 can be dangerous as you can glaze the cylinder walls and ruin the ring seal. I need to get another ecu for meth injection and then I will give it a whirl...
Its making pretty good power without it and it adds more torque than hp in the saab motors. I think I gained 15whp and 39wtrq on the 2.0 motor and I really don't need more torque now, but the other reason is you want to be at least 12.5/1 on a/f before you run it because it richens the mixture a full point and running 10.5/1 can be dangerous as you can glaze the cylinder walls and ruin the ring seal. I need to get another ecu for meth injection and then I will give it a whirl...
Sounds good, any more tourque might be a little to much lol! yea but it couldnt hurt to get another ecu with meth though just to see what your making!!! :lol:
Yea, I want to try it for shi**s and giggles and it would probably help more in the summer when it gets really hot...
John
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
SaabCentral Forums
3M posts
119.1K members
Since 2001
SaabCentral forum the most comprehensive Saab resource on the internet. Join our discussions on the Saab 9-3, Saab 9-5, Saab 900, Saab 9000 and all other Saab models, choose your forum.