18th December 2002, 03:59 PM
I have a question. Does anyone know where the turbo pressure sensor is on an 88 9000 turbo? I have read that a faulty sensor makes the APC solenoid click when the brakes are applied, and my car does this.
18th December 2002, 04:12 PM
This is what the Haynes manual says.....
Working under the facia on the left-hand side, unscrew the screws and remove the lower cover.
Remove the APC mounting panel
Loosen the clips and disconnet the hoses, then remove the pressure switch.
Refitting is the reversal of removal.
Hope it's of some use. All a bit cryptic if you ask me!
18th December 2002, 04:25 PM
Thank You Simon. That is a great help.