SaabCentral Forums banner

Space Saver Spare Usage on 2011 NG95

2K views 4 replies 3 participants last post by  Dryplaid 
#1 ·
I just bought a space saver spare and jack kit for my 2011 NG95 non x drive.

These parts were not specifically made for a 2011 NG95. Bolt pattern does match.

Any issues with using this for emergency short distant runs after a blow out that would not be repairable via goop and compressor.

Will this create havoc for some on board monitoring system?

Or even worse create any mechanical issues within the vehicle.

I am so old school that driving without a spare just doesn't seem right.
 
#3 ·
The bolts on the NG95 are 22mm and the older lug wrench is smaller.

22mm socket, extension and ratchet are now in the trunk well.

BTW this all fits nicely including the goop and compressor.

You do need to remove the foam holder and reuse the hold down nut.
 
#4 ·
Is the hub diameter the same? Is it hub-centric fitment?

Does the offset allow for clearance of the calipers?

It's worth the time to test fit it in your driveway before making a commitment....
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top