21st April 2010, 07:17 PM
Have any of you guys cleaned a Forge BOV (Atmospheric BOV)? I want to clean all of the original lube off and apply a new lubricant. What lubricant do I use? I have taken the valve apart before to tune. I just don't want to use the wrong lube and ruin the seal. Thanks!
22nd April 2010, 02:20 PM
Bearing grease is good (yellow) or (red) either one will condition the o ring and not harden under the hot air temps passing through. Hope this helps!
22nd April 2010, 04:57 PM
I used red grease on mine with no problems.
22nd April 2010, 07:37 PM
clear valve o-ring/ valve lube. ill get you then actual name tonight. we use it at work on anything that has a seal. its amazing
22nd April 2010, 10:54 PM
Thanks for the help guys. I have red axle bearing greese at home so I may just use that unless there is a specific type I should use.
23rd April 2010, 01:27 PM
Thats what I used last time I cleaned/lubed my BOV. 3,000 miles on it and still working great!
23rd April 2010, 04:22 PM
Mobil 1 Synthetic Lube. That's what forge recommends.