27th March 2002, 08:07 AM
All the windows in my 9000XS (J)go down flush to the door EXCEPT the dirvers one which stays about 3" high.
Before I take the door panel off is there some thing I should be looking for?
27th March 2002, 08:18 AM
Sounds like you may have lost some teeth off the regulator. The only way to invstigate properly is to take the door panel off. If your lucky it might just need some lubrication.
29th March 2002, 03:49 PM
Having taken the door panel off I have found that the rail that the window runs up & down on in the centre of the door has broken. There is a bracket at the bottom of the door and where it joins to vertical rail the weld has snapped and has been fixed with a nut & bolt therefore stopping the window going down all the way!
Anybody got a complete rail?