For Sale: 93 T7 parts for sale!!! CHEAP! [Archive] - SaabCentral Forums

: For Sale: 93 T7 parts for sale!!! CHEAP!


Thrilla2653
29-05-09, 11:24 AM
Ok everyone, so over the weekend my car got hit and is getting totaled so i have lots of parts and accessories up for grabs. I will be getting the car back and there is NO front end damage so let me know with anything u need. Lets start with the aftermarket stuff. The car is a 2001 T7 93. Last time i was at the dyno the car made 256whp and 293 tqr on its current setup. Aftermarket items for sale include a stg2 clutch disk, viggen PP and a lightweight flywheel (still brand new and in the box from GS), a freshly rebuilt TD04 mitsu turbo (less then 2k miles on it since the rebuild), a GS open air intake, 3.5bar FPR, big front mount intercooler, JZW stg 3+ ecu tune, GS triangulated rear brace, panasonic cd player, and a mechanical boost gauge with A-pillar single gauge pod. There are other aftermarket odds and ends but nothing that important. Short of the driver side doors and rear quarter panel, the car is still in perfect condition. i have a full grey leather interior and every stock part you could ever want such as seats, dash, ac compressor and so on. The engine has 122,*** on the odometer and also has T5 cams installed for performance. I am getting screwed on the whole deal so i am just trying to recoup a little bit of cash if i can. Please let me know what u want or need and i will do what i can to help you out. NO REASONABLE OFFER WILL BE REFUSED. The best way to reach me is by phone at 484-336-8807, my name is Harley. If i dont answer, PLEASE LEAVE A MESSAGE!. You may also respond to this post but it might take me a lil while longer to respond. Thank you everyone for you time, and i hope i can help you!

jmsaab
29-05-09, 05:49 PM
3" downpipe / what catback are you running?

dibs on the downpipe...
and maybe the catback too (depending on the brand)

i'm interested about the open air-intake too. PMd you.

Thrilla2653
30-05-09, 02:18 AM
the DP is GS's model, and the turboback is a complete custom. It is straight pipe from the cat back, (3" the whole length, had the reducer flanges removed and welded) with a magnaflow resinator and a 4" stock looking oval tip. The exhaust sounds great, lil bit louder then stock, but can still hear the engine over the exhaust at high rpm. No ricer or super loud sound here

doid100
30-05-09, 12:04 PM
Hey, do you have any rims/wheels?
if so please post some pictures

Immo
30-05-09, 05:02 PM
How much for the ECU?

Thrilla2653
31-05-09, 01:21 PM
Hey, do you have any rims/wheels?
if so please post some pictures

I have the 15" 6 spokes painted black, 2 have a lil damage from the accident, pics to come soon

Thrilla2653
31-05-09, 01:22 PM
How much for the ECU?

Asking 200

jmsaab
31-05-09, 03:56 PM
How much for the 3" downpipe form GS?
How much for the custom catback you have?

and do you have clear side blinkers?
let me know.

orka69@yahoo.com
31-05-09, 09:04 PM
jus wonderin what you mite take for the whole car, presuming u are issued a salvage title?
thanks
bo

melbear1
31-05-09, 10:07 PM
hi there, sorry about the accident, do you still have the air intake and the intercooler? Depending on the fit I may be interested, I have a 99 9-3 think it would fit?


Thanks

Thrilla2653
01-06-09, 09:40 AM
they will both fit and yes i still have both, i am waiting to get the car back to start pulling stuff off. PM me with an offer

S2kHEAVEN
01-06-09, 11:43 AM
Sorry to hear, I am interested in the T5 camshafts though....Let me know...

l1k3urm0m
01-06-09, 07:35 PM
im interested in the downpipe and the GS air intake. let me know ASAP when u get that car back. I'll pick up items. depending on pricing.

Thrilla2653
01-06-09, 09:42 PM
DP is a problem as the exhaust and DP and all solid welded together, would need to cut and be re-welded. i would not have a problem with this if u want. as far as the intake goes, alot of people are asking about that, unless u can make an offer i cant refuse, first one who asked about it will get it. let me know

Thrilla2653
02-06-09, 10:55 AM
OK everyone, i just got the car back. I have been getting tons of responses and it is hard to keep track of. IF you want pictures of anything, plz pm me with which pictures u want so i can get them out. Thanks

jmsaab
02-06-09, 03:52 PM
How much for the 3" downpipe form GS?
How much for the custom catback you have?

and do you have clear side blinkers?
let me know.

add some pictures of the dp, and you have a buyer.

Thrilla2653
02-06-09, 03:58 PM
Ok everyone, here are a bunch of pics of the car. if you want any other pics, pls pm me or call me at 484-336-8807. Name is harley. ALSO the car will be posted in the cars for sale section as well as i would love to unload the whole car as opposed to parting it out. let me know thanks, Harley

PICS CAN BE VIEWED AT: http://s36.photobucket.com/albums/e3/Thrilla2653/

Thrilla2653
02-06-09, 04:00 PM
PLEASE CALL ME IF U WANT ITEMS TOO HARD TO KEEP UP WITH PM'S and items are going to go to highest offer, so when u call have an offer ready for what you want. 484-336-8807 Thanks

rc89pl
04-06-09, 04:57 PM
money sent for the hatchbrace, t5 cams and some other goodies.

jmsaab
04-06-09, 06:51 PM
money sent for the hatchbrace, t5 cams and some other goodies.

oh rafal, you dog.

S2kHEAVEN
04-06-09, 09:18 PM
money sent for the hatchbrace, t5 cams and some other goodies.

I also sent money for the cams. Invoice sent to my email. So I am a little confused how you also bought his T5 cams unless he has 2.

Thrilla want to let us know what is going on.......

I just looked, I received my paypal receipt at 11:11pm last night.

rc89pl
04-06-09, 09:22 PM
I also sent money for the cams. Invoice sent to my email. So I am a little confused how you also bought his T5 cams unless he has 2.

Thrilla want to let us know what is going on.......

I just looked, I received my paypal receipt at 11:11pm last night.

weird. 5:23 AM in my case.

S2kHEAVEN
04-06-09, 09:24 PM
How much did he charge you for the cams?

S2kHEAVEN
04-06-09, 09:26 PM
Payment was to a KellieRoss for the cams..........:o

Thrilla2653
05-06-09, 12:01 AM
Picked up a second set from local saab shop to cover difference. All taken care of and shoud recieve soon

S2kHEAVEN
05-06-09, 12:13 AM
Gotcha, thank you......................Are you 100% SURE that they are the T5 cams....in good working order.....I would assume you would know the condition of your own, but not a random pair......Did they tell you anything about where they came from? A 9k, 900, 99 9-3?????

Thrilla2653
05-06-09, 01:54 PM
the ones out of my car not sure, the ones i swaped for came off a 900 head they had layin around

rc89pl
05-06-09, 02:04 PM
who got what?

can you reply to my e-mail?

S2kHEAVEN
05-06-09, 02:29 PM
the ones out of my car not sure, the ones i swaped for came off a 900 head they had layin around


Fair enough......Do you remember who got what.......? Just gave me a little scare there that's all.....:) Now I'm excited again...HAHA......Thank you for making it right......It really doesn't matter which ones I am getting, T5 is T5, I was just wondering if the ones in your car are the ones that I will be receiving, or the 900's............

Thrilla2653
05-06-09, 03:50 PM
s2k you got the ones out of my car, rc89 is getting the second set out of the 900

rc89pl
05-06-09, 09:53 PM
I still have not received your e-mail. Please reply.

rc89pl
08-06-09, 09:20 PM
Just so others know, I received all my parts as requested :) Quick shipping!

oh and my cams are from a 1999 9-3, not 900 as you wrote.

rc89pl
08-06-09, 10:19 PM
update, i got WRONG CAMS. They are not t5 but T7.

http://www.900aero.com/main/tech_main_cams.htm (http://www.900aero.com/)

S2kHEAVEN
08-06-09, 11:07 PM
I also received my camshafts today.......Thank you Thrilla

byastremski
09-06-09, 10:21 AM
Is there anyway you can just do a complete inventory of what you have as far as performance parts and then put prices next to them... you might sell the stuff a lot quicker... just a thought...

REYNOLDS
10-06-09, 04:03 PM
How much for the HVAC panel??

Thanks

Thrilla2653
13-06-09, 10:42 AM
One more week for this car so if you want anything, let me know. Still have Fresh TD-04 turbo, ecu, Frontmount IC, full interior and so on. Car is getting junked at the end of the coming week. Let me know

rc89pl
13-06-09, 11:25 AM
Harley, I got the wrong cams and even though you promised to send the right ones to me, you still didnt get back to me. I called you multiple times and you don't pick up the phone. Why don't you reply on my recent emails?

Rafal

joel0913
13-06-09, 12:25 PM
rc89,

(this is NONE of my business, but) I read above that you received cams from a '99 9-3, and that those are exactly the same as the T7 cams. I believe this information to be incorrect. I myself just put in cams from a 1999 9-3 and seemed to notice some GOOD gains. It could be completely butt-dyno placebo, but my mechanic and I looked at the specs on his part software that specified the lift and duration of the lobes between 1999 and my 2000 cams. And the 1999 had longer duration and higher lift. I believe that 1999 and 2000 9-3's used different cams.

Try them out, you might be pleased

rc89pl
13-06-09, 12:45 PM
rc89,

(this is NONE of my business, but) I read above that you received cams from a '99 9-3, and that those are exactly the same as the T7 cams. I believe this information to be incorrect. I myself just put in cams from a 1999 9-3 and seemed to notice some GOOD gains. It could be completely butt-dyno placebo, but my mechanic and I looked at the specs on his part software that specified the lift and duration of the lobes between 1999 and my 2000 cams. And the 1999 had longer duration and higher lift. I believe that 1999 and 2000 9-3's used different cams.

Try them out, you might be pleased


http://www.900aero.com/main/tech_main_cams.htm

part number of cams sent doesn't correspond with t5 cams from the website. I also inquired info from the dealership and they confirmed that cams i received are not T7. They were put in Saabs from '99 9-3 VIGGEN to 2003 Vert.

Thrilla already told me he is going to get me the right camshafts.

Also, I don't have time to try out for fun and curiosity such an important part which are the camshafts.

joel0913
13-06-09, 03:06 PM
If you had specified in the post that they were from a '99 viggen, I would understand, but '99 9-3 camshafts were T-5 and different from other T7 camshafts. 1999 was the first year they used T7 but ONLY in the viggen, after that it was all T7 (if I have read correctly). You didn't include the part number along with the site you linked to so I was confused, thinking you got standard '99 9-3 cams.

Anyway sorry for the cunfusion, carry on with the bidding!
-Joel

p.s. you will love your new cams.

Thrilla2653
14-06-09, 01:18 AM
as a follow up, i never confirmed they were not T5 cams, you did that. I swaped my T7 cams for what i was told was a set of T5 cams at a local shop. I only know what i was told. As far as they go, keep them and i will send you the sid and the caps for free. that = 100. Sry but i cant get my hands on another set anytime soon

S2kHEAVEN
14-06-09, 01:51 AM
Harley, how much for the grille? Thanks again for the fast shipping of the T5's camshafts. How easy is it to remove that mesh? I would want to paint the mesh black.......Let me know........Or better yet where you got the mesh? Might make sense to just replace with new.....

S2kHEAVEN
14-06-09, 01:53 AM
Foglights also.........??????$$$$$$$$$

rc89pl
14-06-09, 10:36 AM
If you had specified in the post that they were from a '99 viggen, I would understand, but '99 9-3 camshafts were T-5 and different from other T7 camshafts. 1999 was the first year they used T7 but ONLY in the viggen, after that it was all T7 (if I have read correctly). You didn't include the part number along with the site you linked to so I was confused, thinking you got standard '99 9-3 cams.

Anyway sorry for the cunfusion, carry on with the bidding!
-Joel

p.s. you will love your new cams.

no confusion here. also, no need to tell me which cams belong to which car.

918885 and 917088 are the numbers of camshafts i got. i can upload pics if necessary.

thrilla, you got an e-mail.

joel0913
14-06-09, 10:56 AM
RC- Enjoy you cams ;) I'm loving mine.

Thrilla2653
14-06-09, 02:30 PM
Harley, how much for the grille? Thanks again for the fast shipping of the T5's camshafts. How easy is it to remove that mesh? I would want to paint the mesh black.......Let me know........Or better yet where you got the mesh? Might make sense to just replace with new.....

Had the mesh laying around the house. its super easy to remove the hard part is removing the fins and not breaking the back part. and i have the fog lights if you need them. PM me an offer for the grille and lights if you are interested.

rc89pl
14-06-09, 02:44 PM
Had the mesh laying around the house. its super easy to remove the hard part is removing the fins and not breaking the back part. and i have the fog lights if you need them. PM me an offer for the grille and lights if you are interested.

please reply to my email.

andychud
16-06-09, 01:39 PM
Hi,

Is the ECU still up for grabs? If so, how much do you want to ship it to UK?

Cheers,
Andy

switzx
26-06-09, 06:31 PM
Do you still have the turbo?? If so please pm me shooting me a price... thanks

dcr99vig
27-06-09, 07:03 PM
[QUOTE=Thrilla2653;1525821]Ok everyone, so over the weekend my car got hit and is getting totaled so i have lots of parts and accessories up for grabs. I will be getting the car back and there is NO front end damage so let me know with anything u need. Lets start with the aftermarket stuff. The car is a 2001 T7 93. Last time i was at the dyno the car made 256whp and 293 tqr on its current setup. Aftermarket items for sale include a stg2 clutch disk, viggen PP and a lightweight flywheel (still brand new and in the box from GS), a freshly rebuilt TD04 mitsu turbo (less then 2k miles on it since the rebuild), a GS open air intake, 3.5bar FPR, big front mount intercooler, JZW stg 3+ ecu tune, GS triangulated rear brace, panasonic cd player, and a mechanical boost gauge with A-pillar single gauge pod. There are other aftermarket odds and ends but nothing that important. Short of the driver side doors and rear quarter panel, the car is still in perfect condition. i have a full grey leather interior and every stock part you could ever want such as seats, dash, ac compressor and so on. The engine has 122,*** on the odometer and also has T5 cams installed for performance. I am getting screwed on the whole deal so i am just trying to recoup a little bit of cash if i can. Please let me know what u want or need and i will do what i can to help you out. NO REASONABLE OFFER WILL BE REFUSED. The best way to reach me is by phone at 484-336-8807, my name is Harley. If i dont answer, PLEASE LEAVE A MESSAGE!. You may also respond to this post but it might take me a lil while longer to respond. Thank you everyone for you time, and i hope i can help you![/QUOTE

can you update a list for this? wondering about clutch disk, gs intake, the gs rear brace...