so i finally just have to much stuff i'm not using, ton's of c900 part's NG parts,performance part's, i need to get rid of some stuff and i just added another SPG to the mix. Everything listed is resonable obo ,plus shipping. thanks for looking
-Cookin'

T5 injectors 50$ 4 sets perfect of LH chipped car's
Momo Seat bracket's for c900 200$
modded apc 30$ plus a core. 5-6
2 polished and modded Vac capsule 25$
2 2.1 head's 100each 150 takes both.
2 2.3 9k head's 100 each 150 takes both.
3.0 FPR 40$
crackfree dash 200$
SPG skirt kit(just the side skirts) 150$
9k front caliper's 40 each 60 take's both.
2.1 Fuel rail 20$
ton's more stuff i cant think of off the top of my head so just ask if i have it it's up for grab.

Bump...

does that spg side skirt price include the mounting rails and hardware?
I am interested.
Would you ship to 33990 florida???

I also need a pass. side front wheel arch moulding. Do you have one?

the skirt kit does include the rail's and i will supply new screw's and the plug for the body to mount them. i'll check on shipping today. and PM you. i assume you looking for a regular turbo wheel moulding? i'm sure i have one some where. which one do you need? 10 buck for the molding i'll include it for free if you buy the skirt's.
-Cookin'

BUMP... OBO guy's come on buy my stuff i need a new clutch and tran's by next friday...
"Carlisle 09' or Brokedown..."
-Cookin'

does the modded vac capsule have a stiffer spring or just the stop gone?

they are modded stop's and lever, i'd honestly mod them for like 5bucks, the price is mainly do to the manual labor of polishing.
-Cookin'

bump...

Please don't bump or we delete. Thx

can you give us more info on the modded APC? $30+core sounds good, are you just following the 900Aero.com mods? I would be interested in that after i get my motor mount fixed.

yes this is a 900aero.com APC tweak with a few other tricks, knock LED wire lead, optional in cab boost knob for a few extra, let me know.

Do you still have the dash? Also, would you happen to have a pair of headlight bezels for an 86 C900?

Thanks!

yes this is a 900aero.com APC tweak with a few other tricks, knock LED wire lead, optional in cab boost knob for a few extra, let me know.


can you elaborate a bit on the in-cabin boost knob? :-)

basically it's a pot similar to whats inside the APC, but instead of the pot being reworked internally, i offer a option which a wire is run from the APC to dash, with a larger knob pot for in cabin boost adjustments. i mark the adjusting knob plate so u can easily figure it out. this is only recommended for serious performance junkies, as i recommed a setting but if you deciede to crank the boost more it as at your own risk, i do not offer refunds, or damage repair if you blow a motor due to use crack your boost to 30psi on a stock motor. so this is sold with that warning. i offer 5 different boxes, stage1 designed with a stock to lighly modded car(3.0 FPR, filter, wastegate tweak)around 1 bar 14-15psi
Stge2 slightly higher boost pressures 15-18 psi stge1 + intake exhaust
sge 3 18-21 designed with stge2+ FMIC t5 injectors,lh chip
Stge4 21-25 again Stage3+ stage 2 lh eprom, larger turbo's injectors, ect...
Stge 5 is a custom tuned APC to you boost specs more aggressive boost curve. these were built as a race APC for a couple friends cars.
Let me know if you'll be at Carlisle i'll be bringing a couple apc's along al well as doing tweaks while im there.
-Cookin'

A few more things to add i've recently come up with a few extra DI cassettes 100each, some SPG wheels(both Hubs)250 a set, 2 pre 87 SPG kit 400 each, several T5 ecu's 150 each both 5.2 and 5.5 avil. great for custom ecu work. ton's of misc c900 part's from early 80-94 just ask if i have it.
thanks -Cookin'

bout those injectors
are they the red ones?

yes T5 red tops 34lb/hr at 3.0bar.
-Cookin'

may be buying these very soon.... one more paycheck and i should be starting my low boost high comperssion 2.3l 900s project
so that mean next month sometime i should be buying all the turbo parts i need
if you have any other parts like

turbo
oil lines
coolent lines
manifold
intake pipe
dp
ic
ic hoses
pipe leading from ic to throttle body
throttle body elbow
and a few other small things

please let me know

how much bigger are these injectors over stock

so i finally just have to much stuff i'm not using, ton's of c900 part's NG parts,performance part's, i need to get rid of some stuff and i just added another SPG to the mix. Everything listed is resonable obo ,plus shipping. thanks for looking
-Cookin'

T5 injectors 50$ 4 sets perfect of LH chipped car's
Momo Seat bracket's for c900 200$
modded apc 30$ plus a core. 5-6
2 polished and modded Vac capsule 25$
2 2.1 head's 100each 150 takes both.
2 2.3 9k head's 100 each 150 takes both.
3.0 FPR 40$
crackfree dash 200$
SPG skirt kit(just the side skirts) 150$
9k front caliper's 40 each 60 take's both.
2.1 Fuel rail 20$
ton's more stuff i cant think of off the top of my head so just ask if i have it it's up for grab.

I'll take a Vac capsule.

SPG kit still avail????