SaabCentral Forums banner

Auto box Selector Cable Adjustment

1K views 1 reply 2 participants last post by  SaabKen 
#1 ·
I want to check/adjust the auto box selector cable on my 93MY 9000cs. According to the Haynes guide, I gain access by removing the cover panel from the base of the selector lever. However, from the look of it, I can't see how this comes up over the lever which gets wider as it gets higher and there doesn't seem room to rotate the cover as it rises.

Do I need to remove the lever? If so, is it held on only by the two screws on the front face of the lever, or is there anything else to be aware of, particularly regarding the push button mechanism which locks it in a gear?

Many thanks
Peter
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top