SaabCentral Forums banner

Dash Air Vents

711 views 0 replies 1 participant last post by  john bernard 
#1 ·
Like A Damn Fool, I INTENTIONALLY separated the housing from the dashboard.
Naturally, parts went everywhere. Despite diligent hunting, I could not find the baffle or the two springy steel rods. The baffle I omitted. To replace the rods, I cut pieces from a wire handled fly swatter. Not as springy as I would have liked, and slightly over in diameter. In retrospect, I found a better source in some rods in a spring powered auto-opening umbrella. Seemingly a perfect choice from the standpoint of rod diameter,but I'm not going to take it apart again, I hope.Thanks to Munki for the reassembly instructions. They were priceless.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top