My experience is that most internet data is worthless - it is based on "making a sale", not service - when "free" is worthless.
Google makes themselves look good - I believe they should be ashamed of themselves !....;oops:
IMO, a torque limited by a screwdriver and some knowledge is sufficient for the cam cover..
A screw with a 10mm head is sufficiently tightened using 5 -6 " leverage from a 1/4" drive...Poor assembly and excessive tightness are the problem.
Buy the Haynes manual, from England ,its only $40 or so...its all we have, other than the WIS(workshop info system) which is rather hard to find...
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
SaabCentral Forums
3M posts
119.1K members
Since 2001
SaabCentral forum the most comprehensive Saab resource on the internet. Join our discussions on the Saab 9-3, Saab 9-5, Saab 900, Saab 9000 and all other Saab models, choose your forum.