dump valves [Archive] - SaabCentral Forums

: dump valves


phrozen_lad
31-05-03, 06:51 PM
hi, bought my 9-5 a few weeks back.....luving every second of it !!

its a 98' 2.0Eco power, i was wondering if a new dump valve could be attached....(purely for the sound :cheesy: !!)

has anyone tried it ?

thanks

phrozen

mr saabman
31-05-03, 07:27 PM
Hi and welcome to Saabcentral :)
Fitting an atmospheric dump valve to a Trionic 7 equiped car is a big No-No :nono; Unless you want to destroy your new purchase! It upsets the fueling to much,you can fit an uprated recirculating dump vavle but you will still not get the woosh sound.

phrozen_lad
01-06-03, 05:02 PM
thanks mate !!!

il stick to the lowering + alloys route 2 making my 95 look the part !

phrozen

murphwiz
01-06-03, 06:40 PM
Lowering and alloys sounds good..
I can personally recommend the Eibach pro kit :D
http://www.btinternet.com/~leon.murphy/misc/9-5side.jpg

mr saabman
02-06-03, 01:10 PM
Yes lowering and alloys :D
http://mysite.freeserve.com/Saabman/images/3-picture1.gif?0.8221791289126661

Fogcutter
02-06-03, 07:40 PM
Mr Saabman,

Love the wheels. Are they 18"?

And is that spoiler Saab's own, or another aftermarket co.?

Does anyone have a spoiler on an 02 or 03 9-5? I'd like to see a picture of how it looks on the redesigned back end.


Thanks,

-martin

mr saabman
03-06-03, 12:49 PM
Mr Saabman,

Love the wheels. Are they 18"?

Cheers :D I love them too :wink: I wish they were 18's but unfortunately they are 17".
is that spoiler Saab's own, or another aftermarket co.?
The spoiler is an aftermarket one make by ASD tuning,Saab do sell a similar one http://www.saabcatalog.com/retail/category.asp?catalog%5Fname=Saab+Catalog&category%5Fname=Drive9395%3ARear+Bridge+Spoiler+9% 2D5+Sedan&Page=1 :)

Fogcutter
03-06-03, 02:32 PM
So what if they're 17" - can't beat the look of a classic five spoke.


Did the ASD spoiler require drilling through your trunk (boot)? Did you install it yourself?


-martin

mr saabman
03-06-03, 03:17 PM
Yes I fitted the spoiler myself and it did require 4 holes to be drilled,but it was very easy to do :)
The spoiler also came with a bonding kit so it is stuck down solidly.

By the way the holes come out through the seam sealer on the uderside of the boot so when the screws are fitted they form a nice water tight seal as they compress the seam sealer slightly :)