What are the torque specs for the oil pan bolts?

Thanks.

Haynes 2A-2

16 ft lbs,22 nM

Use a torque wrench, calibrated, with these values in the middle range - probably a 3/8"....
Use a special sealant sparingly, that is non-fowling..

Haynes 2A-2

16 ft lbs,22 nM

Use a torque wrench, calibrated, with these values in the middle range - probably a 3/8"....
Use a special sealant sparingly, that is non-fowling..Thanks Earthworm...