SaabCentral Forums banner

removing rear scania roundel

992 views 5 replies 5 participants last post by  snowboardin58 
#1 ·
my rear SAAB/SCANIA emble is hopelessly sublimated . have found posts on removing the saab and 9-3 badges but little about the roundel. tried heating and floss with no luck , just pry and hope? thanks john
 
#2 ·
I replaced both my rear and front emblems this past weekend actually. For the rear, I took a very flat and very skinny screwdriver and a soft cotton rag placed between the screwdriver and the paint. The rear emblem has some self adhesive on it that sticks pretty good. It took a good amount of force to pry it off. Just be very careful and I think you will be alright. I was able to remove mine without any scratches to the paint.

Also, when I pried mine off it left alot of adhesive behind on the paint. Yours will probably do the same. I used a product called 'Oops' and it worked very well.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top