The SID (Saab Information Display) consists of an EDU and SCC integrated in a single unit. It is located in the upper part of the center console.

There are four different versions of the SID:

SID unit 1:

• Clock (analogue)
• Outside temperature display
• Light sensor

SID unit 2:

• Clock (analogue)
• Outside temperature display
• Light sensor
• Audio display
• CHECK messages
• BLACK PANEL
• Trip computer
• Self-diagnostics

SID unit 3:

• Clock (analogue and digital)
• Outside temperature display
• Light sensor
• Audio display
• CHECK messages
• BLACK PANEL
• Trip computer (advanced)
• Self-diagnostics

SID unit 4:

• SID unit 1 with audio display

Upgrading the SID

A commonly asked question is whether it is possible to 'upgrade' the SID to a higher one. This is only really feasible if you are upgrading a SID2 to a SID3 - as the additional functions of the SID3 do not require further modification. If, however, the plan is to move from a SID1 to a SID2, then, in order to enjoy the the additional functionality, further work will be required to fit the extra sensors and this is usually too much effort and expense for the benefits that are offered.

Clearing the 'Time for Service' message.

The method for clearing the 'Time for Service' message can be found here.

Disappearing or 'missing' pixels.

This is a very common issue. I am currently collating all the proposed solutions to this and I will update this page with them very soon.

Please note: This is an enthusiast's web site and is not in any way affiliated with Saab Automobile. All information is presented in good faith. However, I am not a trained mechanic, just an enthusiast. It is your responsibility to ensure that you are competent to carry out any procedures presented here and that they are correct. No responsibility can be accepted for any inaccuracies or consequential loss, injury or damage. Copyright © 2004 - 2005 Munki