|
|
Removing the head unit Tools Required Set of DIN removal tools.
Removal. 1) Insert the DIN removal tools into the holes either side of the unit until you feel a 'click'
2) Grasp the the two tools, one in each hand, and push outwards on them.
3) Keep the outward pressure and at the same time pull on the two tools until the unit slides out. 4) Unplug the connector blocks, ariel lead and CD cable from the rear and remove the unit from the dashboard. Refitting. 1) Reconnect the connectors (they are colour coded) ariel lead and CD lead and slide the unit fully home.
|
|
Please note: This is an enthusiast's web site and is not in any way affiliated with Saab Automobile. All information is presented in good faith. However, I am not a trained mechanic, just an enthusiast. It is your responsibility to ensure that you are competent to carry out any procedures presented here and that they are correct. No responsibility can be accepted for any inaccuracies or consequential loss, injury or damage. Copyright © 2004 - 2005 Munki |
||
Site
kindly hosted by |
||
|
|
 |
|
